Patch cord Dintek CAT.6A F/UTP (1m-2m-3m-5mét)
Liên hệ
Patch cord Dintek CAT.6A F/UTP (1m-2m-3m-5mét)
– Patch Cord UTP Cat.6A F/UTP 10Gigabit, 2 đầu đúc RJ45.
ĐẶT HÀNG NHANH
Giao hàng tận nơi miễn phí nội thành!Đặt hàng nhanh
Hoặc gọi trực tiếp 0915 11 00 72 (MR.Quân) để được tư vấn chính xác nhất!
Bạn vui lòng nhập đúng thông tin đặt hàng gồm: Họ tên, SĐT, Email, Địa chỉ để chúng tôi được phục vụ bạn tốt nhất !
POWERMAX+™ : CAT.6A 10 GIGABIT HIGH SPEED ETHERNET
– Cat.6A 4 Pair F/UTP Patch Cord PVC
– DINTEK PowerMAX+™ Foil Wrapped UTP Patch Cords, are key components of the PowerMAX+™ F/UTP end-to-end solution.
– DINTEK PowerMAX+™ F/UTP Patch Cords are specifically designed to support high speed data networks for 10-Gigabit Ethernet applications, and are fully tested to meet ANSI/TIA-568-C.2 Category 6A channel requirements. The patch cables are made from high quality shielded four pair 26AWG stranded wire.
– DINTEK PowerMAX+™ patch cords are pre-terminated with RJ45 shielded plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX+™ Shielded products be used in a end-to-end system to maximize cabling performance.
– 26AWG stranded wire provides maximum flexibility.
– Brilliant colors make management a snap
– Fully tested to meet ANSI/TIA-568-C.2 category 6A channel requirement.
– The various colors are available to meet TIA/EIA-606 standards.
– The mechanical characteristics and transmission performance meet 16Mbps Token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet, 1.2Gbps ATM and 10G Ethernet requirements.
FEATURES
– Molded boots prevent pin from bending and cables from kinking
– Stranded wire provides maximum flexibility
– Fully tested to meet ANSI/TIA-568-C.2 category 6A requirement
– The mechanical characteristics and transmission performance meet 10GbaseT Ethernet, 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.
ENVIRONMENTAL CONDITIONS
– Twisted pair color code:
o Pair 1> blue, white/blue ring.
o Pair 2> orange, white/orange ring
o Pair 3> green, white/green ring
o Pair 4> brown, white/brown ring
– Conductor: 26AWG Stranded anneal copper wire
– Insulation material: Polyolefin
– Insulation Diameter: 0.96±0.05mm
– Diameter of dielectric core: P1&P3: 0.94±0.005mm | P2&P4: 0.92±0.005mm
– Number of twist pairs: 4 pairs
– Material of jacket: PVC or LSZH
– Jacket outside diameter:. 6.0±0.15mm
– Shielding Material: Aluminum Mylar(Aluminum inward)
– Shield Coverage: 100% coverage with 25% overlapping
– Drain Wire: 26AWG Tinned Copper
– Shielded RJ45 plug
– Contact:copper alloy 50u” gold plated over nickel
– Strength:20lbs. min
– Durability:750 cycles min.
– Insulation resistance: 500 MΩ min.
– Assembly boots prevent cables from kink.
– Wiring schemes: T568B wiring.
– Color: Grey
ELECTRICAL CHARACTERISTICS
– Impedance: 100 15 ohm
– Capacitance unbalance pair to ground:max. 330pf/100m Max
– D.C.R(Max.) : nom. 14.8 ohm/100m at 20℃
– DC Insulation Resistance (Min.): 1500MΩ/100m min.
– Resistance unbalance(Max.):3% MAX./100m.
Applications
– 10GBASE-T Ethernet
– 100BASE-TX Fast Ethernet
– 1000BASE-TX Gigabit Ethernet
– 1000BASE-T Gigabit Ethernet
– 10BASE-TX Ethernet
– ATM CB1G
– 155/622 Mbps ATM
– 100 Mbps TP-PMD
– 100VG-AnyLAN
– 4/16 Mbps Token Ring
– Voice
STANDARDS
– UL Listed
– Meet Cat.6A channel performance requirements in ANSI/TIA-568-C.2
– CENELEC EN 50173-1, CENELEC EN 50288-10-1 for horizontal cable
– ISO/IEC 2nd Edition 11801 Class EA
– Sản xuất tại Taiwan.
Reviews
There are no reviews yet.
♦ CÔNG TY TNHH THIÊN NAM QUỐC
» Địa Chỉ : 428 - 430 Nguyễn Tri Phương - Hải Châu - Đà Nẵng
» Điện Thoại : 02363 613 333
» Hotline: 0915 11 00 72
PHÒNG KINH DOANH
✪ Kinh Doanh 1
☎ 0818 42 43 43
✪ Kinh Doanh 2
☎ 0828 42 43 43
✪ Kinh Doanh 3
☎ 0838 42 43 43
Related products
Be the first to review “Patch cord Dintek CAT.6A F/UTP (1m-2m-3m-5mét)”
You must be logged in to post a review.