This device is a powerful, high-performance Gigabit Ethernet switch, with all 8 ports capable of 10, 100 or 1000Mbps auto-negotiation operation which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps, or 1000Mbps network with no hassle.
This switch supports 802.3af/at PoE, which supplies power for connected devices via Cat5 and above twisted cables. By integrating the data transmitting cable and power cord, it eliminates the effort constricting your network. You could easily connect a Wireless AP or a VoIP phone to this switch without the need for extra outlet. Over current protection and circuit shorting protection are also supported to ensure the safety.
The switch is plug-and-play without configuration and is fully compliant with all kinds of network protocols. Finally, the rich diagnostic LEDs on the front-panel provide the operating status of individual ports as well as whole system.
|Port||8-port 10/100/1000Mbps PoE with port 1-4 support PoE+|
|Nguồn||Power Supply: 100~240VAC, 50/60Hz with Power On/Off Switch
Power Budget: Full load 131.0W
|LED Indicators||System: Power (Green)
Port: Link/Act (Green)
PoE/PoE+: PoE (Green)
Loop Detection: Loop (Red)
|Kích thước||280x44x185 mm (17.32×1.73×11.22 inch)|
|Chuẩn tương thích||IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE 802.3af, IEEE 802.3at|
|Tính năng nâng cao||Supports IEEE802.1p Class of Service
Provides 8 PoE ports with classification identify
Supports over current protection and circuit shorting protection
Supports MDI/MDI-X auto crossover
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
Supports loop detection
Supports 8K MAC entries
Supports extensive LED indicators for network diagnostics
Internal universal switching power supply
|THÔNG SỐ KHÁC|
|Chứng chỉ||FCC Class B, CE, VCCI class B|
|Môi trường||Operating Temperature 0°C~40°C
Operating Humidity 10 to 90% RH (non-condensing)
Chưa có đánh giá nào.